Trulli Trulli Trulli Trulli


Welcome to the Department of Mechanical Engineering




Name : Dr. S M Khot
Qualification : Ph.D (IIT Bombay)
Designation : Prof and Principal
Email id : principal@fcrit.ac.in
Date of joining : 18 August 2000


Machine Dynamics & Vibration, Smart Structures and Systems

UG Subjects


Sr no Subject Semester
1 Dynamics of Machinery I V
2 Dynamics of Machinery –II VI
3 Design of Machine Elements-II VII
4 Design of Mechanical System VIII

PG Subjects


Sr no Subject Semester
1 Mechanical Vibration I
2 System Modelling & Analysis II
Sr No Title Description
1Smart actuator effectiveness improvement through modal analysis
Proceedings of VETOMAC-3 and ACSIM 2004 International Conference, Pages.142-150
2Near Optimal Piezo-Patch Placement Methodology in Clamped Rectangular Plates
49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2008
3Estimation of geometrical parameters of machine elements based on statistical methods to avoid resonance
Journal of Vibration and Control, SAGE Publications, DOI: 1077546311403793
4Active vibration control of cantilever beam by using PID based output feedback controller
Journal of Vibration and Control, SAGE Publications, DOI: 1077546311406307
5Modeling and Response Analysis of Dynamic Systems by using ANSYS© and MATLAB©
Online International Journal of Vibration and Control, 17(6), pp 953-958, SAGE Publications
6Simulation Study of Active Vibration Control of Clamped-Clamped Beam by using Two Piezoelectric Actuators
International Journal of Computer Applications in Engineering, Technology and Sciences (IJ-CA-ETS), ISSN: 0974-3596, Volume 2, Issue 1, pp 188-193
7Effectiveness of Discrete Piezo-Patch Locations in Clamped -Simply Supported Plates
Journal of Aerospace Sciences and Technologies, 58, (2), 133-142
8Evolution of Mathematical Function Based on Statistical Methods for Determination of Geometrical Parameters for Known Natural Frequency of Structural Elements
Proceedings of International Conference on Advances in Mechanical Engineering, SVNIT Surat, Gujarat, pp 678-682
9Favourable Locations of Discrete Piezo-Patches in Clamped Tapered Plates
AIAA-2009-2136, 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials conference, 17th AIAA/ASME/AHS Adaptive Structures Conference, 11th AIAA , Palm Springs,California
10Modeling & response analysis of Dynamic suprmes by using ANSIS & MATLAB
Proceeding of international conference on “Advances in Mechanical Engineeiring” CICAME’2008, S.V.N.I.T.,Surat ,Gujrat,India.
11Active Vibration Control of Cantilever Beam by using Optimal (LQR) Controller
Proceedings of International Conference on Total Engineering, Analysis and Manufacturing Technologies (TEAM Tech 2008), J.N. Tata Auditorium, IISc Bangalore, Bangalore
12Identification of High Control Effectiveness Zones in Clampe-Clamped Tapered Plates
In the International conference on Aerospace Science and Technology (INCAST), 26-28 June 2008, Bangalore India
13Performance Comparison of Various Controller in Active Vibration Control of Beams
Proceedings of International Conference on ‘Advances in Manufacturing and Technology Management (ICAMTM - 2007) at, Parshvanath College of Engineering, Thane.
14An Investigation of Effect of System Parameters on Natural Frequency of Beam by Using Statistical Methods
2nd International Conference on ‘Computational Mechanics and Simulation’ (ICCMS-06), IIT Guwahati
15A Simple Strategy for Piezo-Patch Placement in Adaptive Clamped Tapered Panels
Accepted for presentation and publication in the forthcoming 11th International conference on Nonlinear Vibrations, Stability and Dynamics of Structures to be held at Virginia Tech University, Blacksburg, VA, USA during Aug., 13-17, 2006
16Active Vibration Control of Clamped-Clamped Beam
Proceedings of International Conference on ‘Advances in Materials, Product Design and Manufacturing Systems’ (ICMPM 2005), Bannari Amman Institute of Technology, Satyamangalam in association with North Carolina A & T State University, USA, pp 356-362
17Piezo Patch Placement in Clamed Rectangular Panels for Control Effectiveness in Higher Modes
Proceedings of International Conference on ‘Smart Materials, Structures and Systems’ (ISSS 2005), Bangalore, pp SD105-SD113
18Virtual Instrumentation for Speed Measurement
Proceedings of National Conference on Recent Advances in Mechanical Engineering, NCRAME-2011, RVR&JC COE, Guntur
19An Investigation on Design for Assembly
Proceedings of National Conference on ‘Emerging Trends in Engineering and Technology’ (Sanjivani Vision - 08), Kopargaon
20Simulation Study of Active Vibration Control
Proceedings of International Conference on ‘Mechancail and Manufacturing Engineering’ (ICME 2008), Johor Bahru, Malaysia
21Near optimal piezo-patch Placement Methodology in Clamped Rectangular plates
presented in International conference of 49th AIAA/ASME/ASCS/AHS/ASC Structures, structural Dynamics and Materials, 7-10 April 2008, Schaumburg IL, USA
22A Feasibility Study of Extracting System Model from FEM Model by using ANSYS© and MATLAB©
Proceedings of International Conference on ‘Emerging Technologies and Applications in Engineering, Technology and Sciences’ (ICETAETS-2008), Rajkot, Gujarat, India, pp 1578-1583
23Effect Analysis of System Parameters on Natural Frequency of Cantilever Beam by using the Concept of Statistical Design of Experiments
Proceedings of International Conference on Total Engineering, Analysis and Manufacturing Technologies (TEAM Tech 2007), J.N. Tata Auditorium, IISc Bangalore, Bangalore
24An Investigation on Effect of System Parameters on Natural Frequency of Cantilever Beam by Using Taguchi Method And ANOVA
National Conference on ‘Emerging Trends in Mechanical Engineering’ (ETIME 2006), Bangalore
25Vibration Control using Smart Concepts
Proceedings of 1st National Conference on ‘Recent Developments in Mechanical Engineering’ (YANTRA 2005), Pandharpur, pp 37-41
26Analytical, Experimental and FEM (ANSYS©) Analysis of Cantilever Beams for First Three Modes
Proceedings of 1st National Conference on ‘Recent Developments in Mechanical Engineering’ (YANTRA 2005), Pandharpur, pp 32-36
27Shape Memory Alloys: Smart Material for the New Millennium
Proceedings of 1st National Conference on ‘Recent Developments in Mechanical Engineering’ (YANTRA 2005), Pandharpur, pp 340-343
28Vibration Control of Simply Supported Beam by using Piezoelectric Actuators
National Conference on Advances in Engineering Design, Satyamangalam
29Smart Actuator Effectiveness Improvement through Modal Analysis
Journal of Advances in Engineering Vibrations, 6, (3), 195-207.
30Modeling and Response Analysis of Dynamic Systems by using ANSYS© and MATLAB©
Proceedings of International Conference on ‘Advances in Mechanical Engineering’ (ICAME 2008), SV NIT Surat, Gujarat, India, Dec. 15-17, 2008
31Dynamic vibration absorber with nonlinear spring (Belleville spring)
proceeding of 12th National convention of Mechanical Engineers, held at REC Allhabad.
32Estimation of Geometrical Parameters of Machine Elements based on Statistical Methods to Avoid Resonance
Journal of Vibration and Control , 18 (2), 209-213.
33Extraction of System Model from Finite Element Model and Simulation Study of Active Vibration Control
Accepted for publication in International Journal of ‘Advances in Vibration Engineering”, 11(3), 259-280.
34Development of a Device to Measure the Blade Tip clearance of an Axial Compressor
International Journal of Students Research in Technology & Management, Vol 1(2), 141-149
35Optimal Placement of Piezoelectric Patches for Multimode Active Vibration Control of Beam Structure using Genetic Algorithm
Journal of Vibration Analysis, Measurement, and Control, Vol. 3 No. 3, pp. 152-164.
36Simulation of Active Vibration Control of a Cantilever Beam Using LQR, LQG and H-∞ Optimal Controllers
Journal of Vibration Analysis, Measurement, and Control, Vol. 3, No. 2, pp. 134-151.
37Simulation and Experimental Study for Diagnosis of Misalignment Effect in Rotating System
Journal of Vibration Analysis, Measurement, and Control. Vol. 3, No. 2, pp. 165-173
38Mathematical modeling of Vehicle assembly line
”, Int. J. of Simulation and Process modeling, Vol 11, Nos. ¾, 305-325.
39Cost models for improved vehicle assembly line performance
” Int. J. of Simulation and Process modeling, Vol. 12, Issue no. 2, 111-123.
40Placement strategy of piezoelectric patches for multimode active vibration control of fixed-fixed beam using strain topological pattern
Submitted to possible publication in Journal of Vibration Analysis, Measurement, and Control
41Performance Analysis of Various Controllers in Active Vibration Control of Beams
the 2nd International Conference on Recent Advances in Computational Mechanics and Simulations, held at IIT Guahati, India, December 7-8 2006
42Virtual Instrumentation for Open Loop Speed Control
International Conference on Recent Advances in Engineering, Technology and Management (SPICON 2012), Andheri, Mumbai.
43Experimental Investigation of an effect of Unbalance and Misalignment in Frequency Spectrum
Proceedings of International Conference on Emerging Trends in Engineering, Department of Mechanical Engineering, NMAM Institute of Technology, Nitte, Karnataka.
44Simulation Study of Active Vibration Control of a Cantilever Beam by using State and Output Feedback Control Laws
Proceedings of ASME 2013 International Mechanical Engineering Congress and Exposition, IMECE2013-64041, SANDIEGO,CA, USA.
45Experimental Study of Active Vibration Control of a Cantilever Beam
IEEE Conference Publications, 6th International Conference on Emerging Trends in Engineering & Technology (ICETET-13), G. H. Raisoni College of Engineering, Nagpur, India and G.H.R. Labs & Research Centre to be held during December 16-18, 2013.
46Investigation of Effect of Surface Failures on Inner and Outer Race of Bearing on Vibration Spectrum
IEEE Conference Publications, International Conference on Nascent Technologies in the Engineering Field (ICNTE), Fr. C. Rodrigues Institute of Technology, Vashi, Navi Mumbai, India, 2015.
47Importance of VSM in Lean mfg : A case study
57th National Convention of Indian Institution of Industrial Engineering and 3rd International Conference on Industrial Engineering ICIE 2015 at SVNIT, Surat, November 26 - 28, 2015 , 736-741.
48Optimization of Vehicle assembly line
10th ISDSI International Conference, Nasik, Dec. 28-30, 2016
49Experimental and simulation study of flow induced vibration through straight pipes
IEEE Conference Publications, International Conference on Nascent Technologies in the Engineering Field (ICNTE), Fr. C. Rodrigues Institute of Technology, Vashi, Navi Mumbai, India, January 28-29, 2017.
50Numerical and experimental analysis of fluid flow induced vibration of pipes
International Conference on Advances in Thermal System, Materials and Design Engineering (ATSMDE-2017), Veermata Jijabai Technological Institute, Matunga, Mumbai, 21st – 22nd December 2017.
51Simulation study of active vibration control of beams supported at both ends using optimal controllers
IEEE Conference Publications, International Conference on Nascent Technologies in the Engineering Field (ICNTE), Fr. C. Rodrigues Institute of Technology, Vashi, Navi Mumbai, India, January 28-29, 2017.
52Implementation of H-infinity controller in experimental active vibration control of a cantilever beam
IEEE Conference Publications, International Conference on Nascent Technologies in the Engineering Field (ICNTE), Fr. C. Rodrigues Institute of Technology, Vashi, Navi Mumbai, India, January 28-29, 2017
53Simulation study of MR damper for bump road profile
IEEE Conference Publications, International Conference on Nascent Technologies in the Engineering Field (ICNTE), Fr. C. Rodrigues Institute of Technology, Vashi, Navi Mumbai, India, January 28-29, 2017
54Optimal placement strategy of multiple patches for active vibration control of cantilever beams based on modal strain
International Conference on Advances in Thermal System, Materials and Design Engineering (ATSMDE-2017), Veermata Jijabai Technological Institute, Matunga, Mumbai, 21st – 22nd December 2017.
55Design analysis of discharge reed valve by using FEM package ANSYS©
In the proceeding of 16th National convention of Mechanical Engineers, held at Roorkee
56Experimental Investigation of Effect of Parallel Misalignment in Rotating Machinery
Proceedings of the Third Biennial National Conference on Nascent Technologies (NCNTE-2012), Vashi, Navi Mumbai, Feb 24-25, 2012, pp 48-51
57Comparitive Study of Cooling Jacket Models of a Diesel Engine Using CFD Analysis
In proceedings of the Third Biennial National Conference on Nascent Technologies (NCNTE-2012), Vashi, Navi Mumbai, Feb 24-25, 2012, pp 69-74
58Virtual Instrumentation for Temperature Measurement
Proceedings of the Third Biennial National Conference on Nascent Technologies (NCNTE-2012), Vashi, Navi Mumbai, Feb 24-25, 2012, pp 42-47
59Numerical Investigation of Flow around Side by Side Square Cylinders
Proceedings of the Third Biennial National Conference on Nascent Technologies (NCNTE-2012), Vashi, Navi Mumbai, Feb 24-25, 2012, pp 85-90
Sr No Name of Research Project Type of Grant Name of funding Organization Amount (Rs.) Duration
1 Active Vibration Control by using smart actuators (Experimental study) University Minor Research Grant University of Mumbai 85,000/- 2008-09
2 Virtual Instrumentation for speed measurement Research Grant Fr. C. Rodrigues Institute of Tech, Vashi, India 75,000/- 2009-10
3 Speed regulation of rotating system by using closed loop feedback control concept through virtual instrumentation University Minor Research Grant University of Mumbai 15,000/- 2010-11
4 Active Vibration Control of Cantilever Beam University Minor Research Grant University of Mumbai 32,000/- 2011-12
5 Experimental & Simulation Study of Different Horns for Cleaning University Minor Research Grant University of Mumbai 45,000/- 2013-14
6 Simulation and Experimental Study for diagnosis of misalignment effect in rotating system. University Minor Research Grant University of Mumbai 35,000/- 2013-14
7 Damage detection in metallic plates using Lamb wave University Minor Research Grant University of Mumbai 50,000/- 2014-15
8 Experimental and statistical optimization of binder composition in brake pads to minimize wear University Minor Research Grant University of Mumbai 30,000/- 2014-15
9 Lamb wave based damage detection in thin Aluminum plates using wavelets University Minor Research Grant University of Mumbai 45,000/- 2015-16
10 Development of an Experimental Setup for testing quarter car model for ride comfort University Minor Research Grant University of Mumbai 30,000/- 2016-17
11 Formulation of hot face refractory of an entrained flow gasifier Collaborative Research Project Grant Royal Academy of Engineering, London, UK £50000/- 2016-18
12 Lamb wave based in-situ nondestructive testing of thin plate structures University Minor Research Grant University of Mumbai 78,000/- 2017-18

Fr. C. Rodrigues Institute of Technology

Agnel Technical Education Complex
Sector 9-A, Vashi, Navi Mumbai,
Maharashtra, India
PIN - 400703

  • (022) 27661924 , 27660619, 27660714, 27660715
  • (022) 27660619
  • principal@fcrit.ac.in


Sitemap

 

Visitors Count

web counter
Trulli Trulli Trulli Trulli

©FCRIT, Vashi. All rights reserved.

This website is best viewed in Chrome and Mozilla Firefox in 1366x768 screen resolution.

Developer Team